Articles, Blog

[Mini Red Dot Sight (MRDS) – Element Airsoft] Présentation | Review | Airsoft FR – EN subs


Hi everyone and welcome to this review of the Mini Red Dot Sight from Element This one is available in 2 colors: black and tan Regarding packaging, MRDS is delivered in a simple cardboard box marked with references of the manufacturer and the retailer, here Airsoftpeak Regarding protection, the content is roughly maintained by pieces of plastic and foam paper To start, you will find inside the MRDS with its protection cover 2 CR1632 batteries in plastic bag 1 adjustement Allen key delivered as well in a plastic bag And finally, an information leaflet on the Element 1 year warranty The red dot sight is provided with a rubber protection cover with a correct finishing, it has the merit of being supplied as standard
and this one perfectly fulfill its role of protection The only markings are ones of the adjustment elements of the MRDS Considering the price, the workmanship is correct By removing 2 screws with the supplied Allen key , you can disengage the MRDS from its mount This will allow the installation of the red dot sight on a handgun or ACOG replica by fixing it with another specific mount To power this MRDS, only one CR1632 battery need to be inserted into the provided slot for this purpose This one is accessible by unscrewing two small screws on the top with a small screwdriver To power the red dot sight, you will need to hold for a couple of seconds on the unique back button The aim point is clear, no worries from that perspective 4 levels of brightness are available and to navigate through the various levels with one pressure on the power button A fifth level is present but I suppose it is the automatic brightness adjustment mode of the red dot as this MRDS is equipped on the front with a light sensor To turn the red dot sight off, simply hold for a few seconds on the back button The red point can be adjusted vertically and horizontally thanks to the screws on the side and on the top This MRDS is supplied with a standard RIS rail mount that will be adjusted with a single screw that can only be tighten with your fingers if necessary Even if I install my red dot sight protection, aiming is still very good and quick The advantage of the small size of the red dot sight and its fastening system, is that it can be installed for a variety of uses Personnaly, I will use it as short range aiming device on my ACOG sight In conclusion, this Mini Red Dot Sight has a correct finishing regarding its price The content of the box is rather generous with its 2 standard batteries Aiming is very good and no worries of blurred dot But note that it is difficult to find other specific mounts and you will surely need to check at professional gear But if you are looking for a compact and cheap red dot sight, this Element MRDS may be a good option Thank you to you for watching this video If you appreciated it, do not hesitate to like and share it In order to never miss next publication, be sure to subscribe to the channel and to my various social media See you in next video

4 Comments

  1. Golgy, a sunday gamer Author

    [FR] Toutes mes excuses pour le son, mon micro m'a encore fait défaut et je vais en changer pour la 3ième fois…

    [EN] All my apologies for bad sound quality, mi mic has again let me down and i have to change it again for the third time…

    Reply
  2. Balbuzard90 | French Airsoft Player & Youtuber Author

    Salut !
    Très bonne présentation ! Je crois qu'on doit pouvoir le fixer sur un boitier DBAL de la même marque !
    @+ 🙂

    Reply
  3. EGS-AIRSOFT Author

    Salut,
    La correction des erreurs de parallaxe est elle bonne ?
    Tu jugerais la distance d'efficacité de celle-ci jusqu’à combien de mettre ?
    J'aimerais l'acheter mais j'ai un doute sur ce point.
    Merci Golgy.

    Reply

Leave a Comment

Your email address will not be published. Required fields are marked *